What are the common problems that occur after epoxy floor construction? How should they be identified and solved?

Whether it is a new floor or an old one, everyone must pay attention to the appearance and quality, especially for the new epoxy floors. Customers often inquire about the newly built Tutemei PVC epoxy floor. Due to differences in the construction environment, the appearance and quality of the Tutemei PVC epoxy floor usually have some problems more or less. The editor will detail the following four common problems and remind the constructors to follow the construction regulations to avoid similar problems.

Whitening.

Reasons:

The reaction rate of the paint is too slow in winter, and the reaction of the hardener with the air produces fog.
Construction in a low-temperature and humid place.
Invasion of water after construction.

Prevention methods:

Select the appropriate hardener.
Avoid construction under low-temperature and humid conditions. If necessary, adopt heating and dehumidification measures, such as air conditioning heating and dehumidification, heater heating, etc.
Prevent water invasion after construction.

Color difference.

Reasons:

The main agent of the epoxy floor coating is deposited and the mixing is not thorough.
Feeding on the ground surface, and the contact time with the previous joint is too long.
The coating thickness is uneven.
The material is interrupted during the construction process.
Use different batches of topcoat.

Prevention methods:

Mix the main agent fully before construction.
Avoid too long contact time with the previous joint and try to construct the entire operation line together.
Try to use fixed tools and strengthen the construction mastery of the constructors.
The coating must be prepared in sufficient quantity at one time to avoid material breakage.
It is best to use the same batch of coating.

Long blisters.

Reasons:

The underground layer of the structure, beside the water tank, the bottom layer or other underground water has a high humidity.
Failure to do water stop treatment or poor sealing of the primer.

Prevention methods:

Use a moisture meter to help judge before construction.
Areas with too high moisture and pressure must first do water stop treatment.
Use a hydrophilic epoxy primer.

Crater.

Reasons:

There are holes in the lower layer.
There is oil stain in the lower layer.
The reason of the coating itself.

Prevention methods:

Repair the holes with epoxy putty before construction for construction.
Remove the oil stain in the lower layer.
Use the appropriate coating first.

Regarding the factors affecting the quality of the Tutemei PVC epoxy floor and the preventive measures, the introduction is temporarily here. In fact, the establishment of the Tutemei PVC epoxy floor is a relatively strict project. Once there are problems, it will not only affect the repair and reconstruction, but also consume a lot of funds and affect the production efficiency of the company. Therefore, it is suggested that we should find a professional construction team to conduct the epoxy floor assessment to ensure the final effect.

Relevant Post

2025年1月30日

Reliable PVC Flooring and Epoxy Floor Paint

PVC Flooring

Epoxy Flooring

Epoxy Material

Completed 500+ Project Constructions

Electrical Appliances

Smart Manufacturing

Underground Parking Garage

New Energy

Warehousing and Logistics

Pharmaceuticals

Infrastructure Construction

Food and Beverage

National High-tech Enterprise with Independent Research and Development

Innovative

Technology